UNITECH NEXUS is a PVC flooring manufacturer and supplier: four flooring technologies plus complete installation accessories, all manufactured under one roof. Prices are quoted per project — request a quotation and we will come back with a unit price per m² and the MOQ for each colour.
Request a QuoteHomogeneous vinyl sheet is a single-layer PVC sheet with colour and pattern running through the full thickness, so wear stays invisible. Available at 2.0 mm and 2.5 mm, in 2 m × 20 m rolls, with heat-welded seams that close the floor into one continuous surface.
Heterogeneous vinyl sheet carries a printed decor layer under a clear wear layer of 0.30–0.55 mm with a PUR finish that needs no polishing. Standard 2.0 mm, acoustic 3.5 mm (19 dB impact reduction) and loose-lay 3.0 mm options share the same roll format.
SPC rigid core is a 4.0 mm limestone-composite core with a 0.5 mm wear layer and a 1.5 mm IXPE backing, joined by a drop-lock click system without adhesive. It is fully waterproof and installs over stable substrates with minimal downtime.
ESD vinyl sheet is conductive through the full thickness at 2.0 mm, specified at a surface resistance of 106–109 Ω to IEC 61340-4-1, for electronics production, server rooms and other static-controlled areas.
| Space | Recommended family | Why this one |
|---|---|---|
| Hospital ward, corridor, waiting area | Homogeneous 2.0 mm | Colour through the full thickness keeps wear invisible under trolley traffic; welded seams leave no gap for soil; EN 13501-1 Bfl-s1. |
| Areas where static control is specified | ESD 2.0 mm | Conductive through the full thickness; surface resistance 106–109 Ω to IEC 61340-4-1; R10 slip. |
| Classroom, kindergarten, canteen | Homogeneous 2.0 mm or Heterogeneous standard | Heavy foot traffic and frequent cleaning; homogeneous resists wear visually, heterogeneous offers 60+ decors at lower cost. |
| Office, retail, hotel public area | Heterogeneous standard 2.0 mm | Photorealistic wood and stone decors; PUR finish needs no polishing; EN 660-2 Group T at 0.5 mm wear layer. |
| Upper floor with impact-noise requirement | Heterogeneous acoustic 3.5 mm | Foam backing gives 19 dB impact-noise reduction to EN ISO 717-2. |
| Fast refurbishment over a stable substrate | SPC 4.0 mm + 1.5 mm IXPE | Click-lock, no adhesive, no drying time; 100% waterproof over 24 h immersion. |
| Area with underfloor heating | Homogeneous, heterogeneous or SPC | All three are declared suitable; keep surface temperature at or below 27 °C. |
Family recommendation is a starting point for specification, not a substitute for a project drawing. Send the space type and traffic class and we will confirm the thickness and wear layer in writing.
| Property | Homogeneous | Heterogeneous | SPC | ESD |
|---|---|---|---|---|
| Total thickness | 2.0 / 2.5 mm | 2.0 / 3.0 / 3.5 mm | 4.0 mm + 1.5 mm IXPE | 2.0 mm |
| Wear layer | Full thickness | 0.30–0.55 mm | 0.5 mm (0.3 mm option) | Full thickness |
| Format | 2 m × 20 m roll | 2 m × 20 m roll | 1220×182 / 1524×228 / 610×122 / 610×305 mm | 2 m × 20 m roll |
| Fire classification | EN 13501-1 Bfl-s1 | EN 13501-1 Bfl-s1 | EN 13501-1 Bfl-s1 | BS 476 Class 1 / EN 13501-1 Bfl-s1 |
| Slip resistance | Anti-slip finish; DIN EN 16165 class on request | R9 (DIN EN 16165) | R10 (DIN EN 16165) | R10 (DIN EN 16165) |
| Abrasion | EN 660-2 report on request | EN 660-2 Group T (0.5 mm) / Group P (0.2–0.3 mm) | AC5 (EN 13329) | EN 660-2 Group T |
| Dimensional stability | ≤0.25% (EN ISO 23999) | ≤0.25% (EN ISO 23999) | — | ≤0.25% (EN ISO 23999) |
| Indentation | ≤0.10 mm (EN ISO 24343-1) | ≤0.15 mm (EN ISO 24343-1) | ≤0.05 mm at 250 N | ≤0.10 mm (EN ISO 24343-1) |
| Weight | ~2.8 / ~3.5 kg/m² | ~2.9 kg/m² | ~8.5 kg/m² | ~3.0 kg/m² |
| Underfloor heating | Suitable | Suitable, max 27 °C | Suitable, max 27 °C | — |
| Surface resistance | — | — | — | Rg 106–109 Ω; Rv ≤109 Ω (IEC 61340-4-1) |
Values are declared product data. Test reports are issued per production batch and supplied on request; where a property is not declared for a family it is shown as — rather than estimated.
The decisive question is what should happen when the floor wears. In homogeneous sheet the colour and pattern run through the entire thickness, so scuffing and traffic do not open a visual difference between layers — the reason it is the default for hospitals and schools. In heterogeneous sheet a printed decor sits under a clear wear layer, which allows photorealistic wood and stone at a lower cost per square metre, with the wear layer thickness deciding service life.
If the space is judged on appearance retention under heavy traffic, choose homogeneous. If the design brief leads and the budget is fixed, heterogeneous with a 0.5 mm wear layer reaches EN 660-2 Group T and performs well in offices, retail and hotel public areas.
Sheet flooring is welded into a continuous surface with no joints for soil or water, which is why it dominates healthcare and food areas. SPC is a floating click floor: it needs no adhesive, can be walked on immediately, and tolerates moisture as a material, but it is a jointed surface and depends on a flat, stable substrate.
Choose sheet where hygiene and seamlessness are the requirement; choose SPC where downtime, adhesive cure time or substrate moisture drive the programme.
Full-thickness colour vinyl sheets. Heat-welded seamless finish. BS 476 Class 1 / EN 13501-1 Bfl-s1 fire-rated. 25+ year service life.
Static dissipative homogeneous PVC. Surface resistance 10^6-10^9 Ω. Permanent full-thickness conductivity. For electronics manufacturing, server rooms, and laboratories.
Multi-layer printed vinyl. Photorealistic wood and stone aesthetics. 0.30-0.55mm wear layer. PUR surface. 60+ patterns.
Click-lock floating floor. 100% waterproof limestone-polymer core. Pre-attached IXPE. 80+ decors. AC5 rating.
All manufactured in-house for guaranteed compatibility
200+ colors. Standard, self-adhesive & cove.
Color-matched. Triangular & round.
Aluminum & PVC. Anti-slip.
Handrails, corner & wall guards.
Acrylic, PU & epoxy.
CS/SK35. PVC capping strip for the wall-floor junction (35 / 40 mm).
E15/E38. Floor-to-wall cove.
Soft PVC L-profile. 25×25 mm, 50 m rolls.
2-in-1 flexible profile. Cove + capping.
310mm anti-slip. RoHS-compliant.
Specification checklists, junction details, and RFQ guides — everything your project team needs to plan accurately
Report-backed values are third-party tested (Intertek, SGS) and published on our Test Reports page. Other classifications are product-performance data supported by in-house laboratory testing and are available on request.
A written quotation needs eight inputs. Send them together and the reply is a priced offer rather than a follow-up question.
Standard MOQ is 500 m² per colour; OEM and custom colour matching start at 1,000 m² per colour. Standard lead time is 7–10 days. Samples are available for approval before an order is placed.
If you would rather start from the building type than from the material, the solutions by application page works the other way round: hospitals, schools, hotels, cleanrooms and retail, each with one recommended construction, its specification guide and its downloads.
Four details get you a quoted price
Send these four by email or WhatsApp and we reply with a technical data sheet and a firm price. With fewer details we can only quote a range.
Contact our technical team for a free consultation.
Get Expert AdviceChat on WhatsAppSend a quick message — we reply within 1 business day.